- Hello Customer - Log in or Register!
During operation, in order to give full play and FAG bearings should be long-term performance in use should be carefully carried out relative, so even if the eye card can not be less than the small dust intrusion bearings.
Resulting in the use of indentation will become scars and cause of the accident, the traditional automotive wheel bearing is composed of two tapered roller bearings or ball bearing combination, FAG bearings installed, greased, sealed and clearance the adjustment is carried out in the automotive production line. This structure makes it difficult in the automotive assembly plants, high cost, poor reliability, and maintenance car maintenance, but also on FAG bearings for cleaning, oiling and adjustment. Cubo is a standard angular contact ball bearings and tapered roller bearings on the basis of developed, it will be used as one of the two sets of bearings, with assembly performance, can be omitted clearance adjustment, light weight, compact structure, load capacity large, sealed bearings can be pre-loaded into the grease, are omitted from the external hub seal and maintenance, etc., have been widely used in cars, in the truck also has a tendency to gradually expand the application.
FAG Bearings Wheel Bearings charged with reducing the frictional resistance of the chassis operation, the task of maintaining normal driving. If the wheel bearings out of trouble, may cause noise, bearing heating phenomenon, especially in the front wheel is more obvious, easily lead to loss of directional control and other dangerous phenomena. Therefore, the wheel bearings must be scheduled for maintenance.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 7912A5DB NSK | 60 | 85 | 13 |
| 7311BDB NSK | 55 | 120 | 29 |