- Hello Customer - Log in or Register!
FAG Bearings the subject of the purpose of sub-load under which they suffer, FAG Bearings suffered a radial load, radial load Bearings can suffer but also suffered the axial load, axial load Bearings mainly suffered. Axis suffer overload condition is disseminated on the shaft radial load Fr and Fn split dip in the shaft two Bearings radial load. Bearings the dip of the radial load Bearings of the rotating body and inside and outside the ring arms at the pulsating cyclic stress dip occurred dejected pitting and Bearings running to reach the sure time, the Bearings rotating body, inside and outside the ring raceway lost to the original shape shaft torsional accuracy decreased, mechanical vibration and noise added, the ultimate cause of Bearings loss of efficiency.
Axis suffer overload condition, Fr and Fn split is disseminated to the axis of the radial and axial load Fr and Fn split is disseminated to the axis of the left Bearings radial and axial load, and Fa2 split is disseminated to the axis of the right end of Bearings radial and axial load. FAG Bearings dip in the radial and axial load, not dejected pitting occurs, and the dip of the axial load, the end of the Bearings was pressed, the other end of FAG Bearings relax, so that the compression side Bearings component arms face also occurred on the wear and tear, loss of efficiency is to accelerate the Bearings. Bearings in the dip of the axial load Bearings components suffer extrusion, is an overview of the rotating body and inside and outside the ring arms dejected pitting and wear occur in the course of operation. Overload or the New Year night against very large load on the rotating Bearings damage level will cause the Bearings of the rotating body and inside and outside the ring arms at the occurrence of plastic deformation of the Bearings element is always deformed, to shorten the Bearings life.
Rotation Bearings, it should be very smooth and no abnormal sound, nor should be impurities. FAG Bearings allowed in things running for a light fine sound, if the sound of the New Year night or unusual noise or crash, endorsement Bearings failure. Anti-rust Bearings disposed of using a slightly anti-rust oil spray fragrance, and the dosage is not normal. FAG Bearings clean aromatic. Bearings in the horizontal surface and vertical surface of the junction has a large elegant chamfers, and has a black border. Bearings in a normal course of operation, the parts settle Bearings allows the inevitable temperature, when the hand stroked institutions housing should not feel hot as normal. If FAG Bearings operating history of temperature is too high, you might consider whether the appropriate requirements or deterioration of the quality of lubricating oil, lubricating oil viscosity is too high-end identity; briefly settled institutions assembly tight, tight Bearings assembly; Bearings link frame or rotor separated.
FAG Bearings reason the noise of many, one of the Bearings inner and outer rings with the overview of wear. Again, the Bearings lubrication is not enough to form a dry friction Bearings fragmented and other very sound. Link FAG Bearings and lubrication, cleaning is very serious. Search inspection is required prior to cleaning mechanical profile, then remove the Bearings parts around. The seal is very weak parts, is the demolition to be alert, do not apply excessive force, then a detailed search of seized oil seal and the surrounding parts, if it had been thrown out of the bad symptoms, be sure to tune, bad oil seal will lead to Bearings damage and Yan have to set up equipment, furnishings downtime.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 16019 NSK | 95 | 145 | 16 |
| 6919 NSK | 95 | 130 | 18 |