Date: 2013-08-20

FAG bearings axial clearance adjustments should be noted

Bearing life is the relationship with the care and maintenance is very important, as it relates to FAG bearing life length of the level of productivity. Good maintenance the use of FAG bearings, will bring a lot of benefits, for example, can bring about high production efficiency, producing more high quality precision products, maintenance can extend the life of the times once again purchase cost savings for you.
Adjustment gasket 1 method:
In bearing end cover and bearing block end surface Zhijian filled placed a group soft material (soft steel tablets or elastic paper) gasket; adjustment Shi, first does not placed gasket loaded Shang FAG bearing end cover, side uniform to screwed tight bearing end cover Shang of screws, side with hand turning axis, until bearing scroll body and outer ring contact and axis internal no gap weizhi; then measurement bearing end cover and bearing block end surface Zhijian of gap, again plus FAG bearing in normal work Shi by needs of axis to gap; this is by needed filled placed gasket of total thickness, And gasket ready to fill in between the bearing end cover and housing, and finally tighten the screws.
2 adjustment bolt method:
Circle pressure pressure on the bearing outer ring, by adjusting bolts pressure; pressure before adjusting, first measure the pitch adjustment bolt, and then slowly tighten the adjustment bolt, until such time as bearing no gap, and then calculate the adjustment bolt corresponding rotation angle. 1.5mm,FAG pitch for example needed for the normal functioning of the bearing gap, then the required rotation angle adjustment bolt 3600x0.15/l.5=360 when reverse 360,FAG adjustment bolt axial clearance of the bearing on access to 0.5mm, and then snap the gasket to be fixed.
Flow of grease-lubricated bearings running grease should be replaced after 1500 hours, filling quantity of oil to be just the right amount, because too much or too little grease will cause fever of FAG bearings, refueling amount generally lies in the bearing Chamber volume 1/2~2/3.

Previous: SKF bearing maintenance best practices
Next: Judging fault damage criteria and processing method of NSK bearings

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
RLM1620 NSK	16	24	20
RLM1616 NSK	16	24	16

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.