Date: 2013-08-20

FAG bearing the high temperature and high lubrication

 (1) drip method
    Quantitative supply of lubricating oil drip lubrication is suitable for the need to have the FAG bearing components, drip volume is generally appropriate one drop every 3-8 seconds, too much oil will cause increased bearing temperature.
2 cycle oil law
    Transported to the pump to filter the oil in the bearing components, and then filtered after cooling lubricants FAG bearings. Cycle oil can be taken away a certain amount of heat, bearing cooling, and therefore the method is suitable for higher speed of the bearing components.
(3) the oil bath
    Oil bath lubrication is the most common method of lubrication, suitable for low, FAG bearings, lubrication of medium speed, bearing part of the dip in the tank, lubricating oil is brought up by the rotation of the bearing parts, and then flow back into the tank oil level should be slightly lower than the center of the lowest rolling element.
(4) injection method
    The oil pump high pressure oil nozzle to reach all parts of FAG bearings, launched into bearing in the oil bearing the other end into the tank. Bearing the high-speed rotation, the rolling element and cage around the air with a very high rotational speed the formation of air flow, is difficult to use the general method of lubrication the lubricant to the bearing, then must be the lubricant spray with high pressure water jet method to the bearings, the nozzle position on the inner ring and between the cage center.
5 spray
    The formation of oil mist, dry compressed air through the nebulizer and lubricants mixed jet bearing airflow to be effective in the FAG bearing cooling and to prevent the intrusion of impurities. This method is suitable for high-speed, high-temperature lubrication of the bearing components.

Previous: Adjust the trajectory to reduce TIMKEN bearing noise
Next: With the appropriate assurance FAG bearing life and feasibility

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
6022 NSK	110	170	28
16022 NSK	110	170	19

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.