- Hello Customer - Log in or Register!
FAG bearings are mounted is reasonable, will affect the FAG bearings precision, long life and performance. Therefore, please fully research on bearing installation, follow the operating standards, contains the following items for bearing installation.
Cleaning bearings and spare parts
Is grease lubricated bearings and double-sided oil seals or shields, seals without cleaning before the bearings are mounted. ）
Second, check the dimensions and finishing of parts
Three installation methods
FAG bearing should be installed according to the bearing structure, the size depends on the size and nature of bearing parts fit, pressure should be added directly in the tight fit have rings on the face, shall not pass through the rolling pressure bearing installation generally uses the following methods:
(1), keep the bearings and the surrounding clean.
Small dust even eye can't see, will bring bad effect to the FAG bearings. So, you want to keep around clean, so that dust will not incursions into the bearing.
(2), carefully used.
And the FAG bearing a strong impact in the use, will have scars and creasing and become the cause of the accident. Serious cases, cracks, breakage, so care must be taken.
(3), using the right tools.
Avoid replacing it with some existing tools, you must use the appropriate tool.
(4), pay attention to corrosion of bearings.
When operating the FAG bearing, Khan will become the cause of rust on the hand. To note that the clean hands operation, it is best to try to bring a glove.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 24144CE4 NSK | 220 | 370 | 150 |
| 23144CE4 NSK | 220 | 370 | 120 |