Date: 2013-08-20

Environmental considerations on impact strength of the use of FAG bearings

FAG bearings use environment: according to site conditions and conditions of use and the environment used to select size, precision, combined with suitable bearing is a prerequisite to ensure that the bearing service life and reliability.
Part of plant used bearings applied to accommodate radial loads in the radial and axial combined loading, usually with two sets of paired bearings use, mainly in the automotive front and rear wheels, active, differential bevel gear, gear reducer, transmission parts.
Allowed speed: installed properly, lubrication good environment that allows FAG bearing limit speed of 0.3-0.5 times times. Under normal circumstances, to 0.2 times the speed limit of the most desirable.
Allow the tilt angle: bearings are generally relatively tilt the housing bore axis is not allowed, such as tilt, maximum of 2 '.
Allowable temperature: under normal load, and with high temperature performance of lubricants and lubrication under adequate conditions, FAG bearings in general allow at-30 degrees centigrade-150 ℃ ambient temperature.
How to guarantee that normal FAG bearings during the application process, how to make bearings without injury to make longer bearing life.
1, selection and control of shaft and housing tolerances: bearing pressed into the bearing should rotate flexible no block. If there are clearly not flexible rotation, then axis dimensions are too big, the tolerance to cut.
2, bearing Assembly methods: FAG bearings are high-precision products, such as improper Assembly can easily cause damage to the bearing Raceway, cause damage to the bearing.
3, assembling foreign object prevention: FAG bearing when mounted to the rotor dynamic balance easily produced when iron filings into the bearing internal dynamic balance, so it's best to load bearing dynamic balancing before.
4 Prevention of rust, paint: paint and rust is characterized by multiple sealed-type motor, motor Assembly, sounds very good, but after some time within the warehouse, the electrical noise change very large, with serious rust removed bearing phenomenon.
FAG bearings in the process of checking in, if there are too many problems, as well as these bearings are bearings can be faked. That reminded everyone to use caution when selecting carefully.

Previous: Small particles caused by injuries in SKF bearings noise detection method
Next: Proper use of NSK bearings need to pay attention to what issues

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
23272CAKE4 NSK	360	650	232
24172CAK30E4 NSK	360	600	243

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.