Date: 2013-08-01

Drylin R Linear Bearings Replace Bearing Guides(Pic)

Igus UK has introduced Drylin R linear plain bearings, which are lubricant-free, robust and corrosion-resistant.

Drylin R linear plain bearings are based on wear-resistant polymers developed especially for linear technology.



The standard gliding-films are made of Iglidur J material for excellent gliding friction coefficients.

The high-temperature gliding films made of Iglidur X allows use with a long-term application temperature of up to 250C.

The dimensions of linear plain bearings are compatible with those of linear ball bearings.

Drylin bearings run on standard round shafts and can be used with most shaft materials.

Even if damp dirt does get onto the shaft, it is wiped off by the individual slide-ways and pushed back into the contactless paths.

The bridges of the bearing surfaces then slide over the path, which has been wiped free of all soiling.

The Drylin R range comprises of gliding films and press-in bushings, linear plain bearings, housing bearings, flange housings as well as slides and linear housings.

Suitable shafts, supported shafts, end blocks and shaft brackets are all available ex-stock.

The linear bearings are replacing metallic bushings in many cases.

In a seat-cover testing machine in the Lear Corporation, the American automotive components supplier, the Drylin R flange bearings have been functioning without failure for more than one and a half years.

In contrast, the linear guidance systems used previously had to be replaced after only three months of use.

The load exerted on them is high in both Y and Z direction and normally runs at a short stroke of 10 to 40mm.

An even more drastic example can be found at the Poppe Gummiwarenfabrik rubber factory in Giessen.

Here, ball bearings used in a cutting unit for rubber hoses failed after only six months, mainly because of heavy talcum soiling.

In the meantime, self-adjusting Drylin R linear plain bearings have been performing competently for the past five years.

Previous: NSK Reduces Customers' Costs with Extended Bearing Life(Pic)
Next: Kaydon Q4 Profit Drops 39 pct

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
2315 KOYO	75	160	55
1315 KOYO	75	160	37

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.