Date: 2013-08-20

Deep groove ball bearings Timken maintenance best practices

Deep groove ball bearings in the gasoline cleaning, wipe the residual sludge in the bearing and dust, where there was rust Timken bearings with metallographic sandpaper gently wipe the polished, up until the sense of touch is no rough.
After using dry rags to clean the bearings dry, then put in antirust oil immersion. During this process, full contact with rust preventive oil to Timken bearings, bearings and keeps turning, so as to enable the formation of oil-film antirust oil cover on a bearing surface, achieve the purpose of rust.
Next use lithium grease? with butter? need to evenly on the surface of deep groove ball bearings, including inner and outer rings, wheel, cage. Turn the bearing and is wiping edges, make the butter into the Timken bearing, insufficient lubrication.
In order to save costs, we "treasure", the warehouse shipment of cement packing bags, cropped to fit bags, axis contracted tightly, wrap, callout bearing specifications and puts it back to store shelves.
(1) clean
First record appearance of deep groove ball bearings, residual amount of memory that the bearing lubricant, sampled after checking the lubricant, cleaning bearings, the general use of kerosene or gasoline, sometimes temperature can also be used as needed, such as lye. But no matter what kind of cleaning agents, are often filtered clean.
Deep groove ball bearings cleaning rough cleaning and washing, in containers, metal mesh on the bottom first, Timken bearings do not directly contact the stolen goods in the container.
When rough wash, brush clearing, such as in the oil grease or stickers. At this point if oil turn the Timken bearing, attention to prevent foreign bodies such as causing damage to the bearing rolling surface.
When sperm washing, slowly turning in the oil deep groove ball bearings, rotating bearing, careful cleaning. After completing the cleaning, coating rust preventive oil on the bearings immediately or rust-inhibiting lipid peroxidation.
(2) check
The Timken bearing can be used to determine split, you want to focus on checking the dimensional precision, running accuracy, internal clearance as well as the mating surfaces, Raceway surface, rolling, cages and seals.

Previous: The thrust ball bearings Timken the light usage considerations
Next: INA self-aligning ball bearings axial clearance adjustments should be noted

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
22318EAKE4 NSK	90	190	64
21318EAKE4 NSK	90	190	43

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.