Date: 2013-08-20

Clear method of FAG bearings oil

FAG latest development and production of a new type of lubricant. Some applications due to their inability to close, so cannot be added lubricants, or operate environmental requirements are very good performance. This new type of lubricant is ideal for these special cases. This solid lubricants (Solid Oil) can be completely filled with FAG bearing internal spaces, wrap the cage and rolling elements, so that not only the functioning of FAG bearings and did not in any way affect, but also greatly extend the life of FAG bearings.
Polymer materials are countless micro-porous structure can accommodate 4 times times more oil than usual. As the table moves in, lubrication will slowly release so that you can ensure the balance of every FAG bearing lubrication.
Oil-filled polymer materials were molded into the FAG bearings. During the molding process, around the rolling elements and raceways will form a very narrow gap, allowing FAG bearing parts to rotate freely. Infiltration of clearance of oil provides good lubrication for the bearing from the start. And compared to traditional structures, this lubricant can bring a range of benefits.
Particularly worthy of mention is, not what kind of operation temperatures, it can ensure that the lubricant evenly distributed in the FAG bearing surface.
Due to frequent use, oil will reduce the service life of bearings, so how do we clear the FAG bearing grease on it? To teach you one of the following easy to clear oil FAG bearing method.
Soft dry oil or rust paste hardened bearing should be immersed in 100 ℃ to 200℃ in hot oil, vise clamping bearings, with hair brush clean oil on the bearings. Soft dry oil or rust paste is heated to 100 ¡æ ~200 ¡æ melting, easily washed out from the bearing gap. Sometimes multiple times as long as the bearing oil shake. Oil from the slit mid-go.
When cleaning radial spherical bearings FAG bearings, ball, bead racks, inner ring should be horizontally out from the outer ring, and then dipped in hot oil, cleaning should also be of short cylindrical roller bearing rollers, beads, inner ring and outer ring off.
In the hot oil when clean, oil temperature should not exceed 20 degrees centigrade.

Previous: Considerations for SKF bearings used in greases
Next: Iwami NSK bearings run rule and failure

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
RLM6040 NSK	60	70	40
RLM556835-1 NSK	55	68	35

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.