(1) attention to sealing INA bearings not used this law to clean, sealed inside should be adhered to as it stood could not be cleaned.
(2) will be equipped with a clean appearance, such as gasoline, kerosene, toluene or xylene solution cleaning clean, wipe with a clean cloth, and then spread a thin layer of varnish, this makes the device efficiency of lunch to operate.
(3) provisional unit opened INA bearing package, immerse it rotating liquids such as gasoline to hand in mitigation mentioned above, make sure you adhere to, rolling elements and raceways appearance of encapsulated oil is thoroughly clean.
(4) when cleaning a large number of INA bearing, 90~100℃ hot oil shower hot with temperature so that the encapsulated oil condenses, and seamless and without net exfoliation tool dig all the old oil, spraying hot for a few minutes, and then rinse it with kerosene oil, last used petrol to clean it again. After cleaning, you should put on INA bearings are in the stage of film gloves dry on a clean cloth or paper.
Product Model | Inside Diameter | Outside Diameter | Thickness |
23932CAE4 NSK | 160 | 220 | 45 |
22330CAE4 NSK | 150 | 320 | 108 |