- Hello Customer - Log in or Register!
23164 cak/W33 bearing parameter specification
The new model: 23164 cak/W33 ;old model: 3153764 hk
Brand:yangdian ; bearing material :high carbon chromium bearing steel (GCr15) (full hardening type)
Inner diameter: 320.00mm ; outer diameter:540.00mm
Weight :176.00kg ; thickness:195.00mm
N brass entity column roller cage and materials for double column
Useing: the general
Spherical roller bearing is in the two race between inner ring and groove for spherical outer ring, the cylindrical roller bearing assembly.
Spherical roller bearings are divided into: cylindrical inner hole and cone hole. Cone inner hole of rear taper 1:12 respectively, code-named K of spherical roller bearing type (153000 or 113000) and the rear 1:30, code-named K30 spherical roller bearing. This kind of bearing with conical shaft timing, inner ring moving along the axial radial clearance of the bearing can be adjusted.
Main applicable cage: stamping steel cage (suffix E), glass fiber reinforced polyamide 66 cage (suffix TVPB) entities, machined brass cage (suffix M), vibration occasions stamping steel cage (suffix JPA)
Main use: papermaking machinery, speed reducer, railway vehicle axle, rolling mill gear box, roller mill, crusher, vibrating screen, printing machinery, woodworking machinery, all kinds of industrial reducer, vertical arrange ushering self-aligning bearing.
Spherical roller bearing with two race between inner ring and groove for spherical outer ring, equipped with cylindrical roller bearing. On the surface of the outer ring raceway curvature center and bearing center consistent, so with automatic self-aligning ball bearing the same tone heart function. There was a deflection in the axis, a hood, can automatically adjust load and two direction axial load. Large radial load capacity, suitable for heavy load and impact load. Inner circle diameter is tapered bore the bearing, it can be installed directly. Or use the set set, remove the cylinder is installed on the cylinder axis. Keep the rack stamping steel cage, polyamide forming keep frame and copper alloy cage car system. For the self-aligning bearing, the shaft bearing load case shaft hole, using middle ring installation can prevent the outer ring tilt and rotate. Should keep in mind that some of the size of the self-aligning ball bearing ball protrudes from the side of the bearing, so the middle ring should be recessed installation, in case of damage to the ball. A lot of bearings commonly used machinery.
In type separable bearings, inner ring and outer ring can be installed separately, thus simplify the installation process, especially when the inside and outside the circle must be especially interference fit. In the inner ring has been installed in place of the axial load including outer ring of bearing box, must pay attention to see if inside and outside the circle to the right, in order to avoid scratch bearing raceway and rolling parts. If a cylinder and needle roller bearing used without the inner ring or side of the flange rim flange of the inner ring, it is recommended to use to install the sleeve. Sleeve diameter should be equal to the inner ring raceway diameter F, machining tolerance standards should be d10. Drawn cup needle roller bearing is best to use the core shaft installation.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 4T-29685/29620 NTN | 73.025 | 112.712 | 25.4 |
| 4T-H715345/H715311 NTN | 71.438 | 136.525 | 46.038 |