- Hello Customer - Log in or Register!
Regular maintenance is a form of preventive maintenance based on the running time of the bearings, bearing characteristics of periodic maintenance. Based on the wear of bearings, predetermined maintenance categories, intervals between maintenance, repair and technical requirements. Bearing maintenance plan plan arrangements for starting hours may be used for a long period of time.
1. periodic maintenance applies to fully grasp the wear of the bearing and usually difficult to stop in the production process process production of bearing, automatic production lines for the maintenance of the main bearings of SKF bearings and continuous operation of the kinetic energy production.
2. Maintenance mode: FAG bearings failure or performance, precision is reduced to an acceptable level, because they can no longer use the carry out unscheduled maintenance as maintenance, which is better known as the maintenance.
3. Bearing repair methods: select bearings for repairs, prevention policy must be carried out. According to the means of production, bearing characteristics and its importance in the production process, select the appropriate maintenance ways. Through daily and periodic inspection, condition monitoring and fault diagnosis means mastering the technical condition of the bearings. Based on product quality and production requirements and status status deterioration for NSK bearings technology and analysis to determine the maintenance category, prepare bearing a preventive maintenance programme. Should be fully prepared for technical and production work, maximize production margins, for service in a timely manner. Maintenance of active introduction of new technology, new materials, new technology and modern management methods to ensure quality of maintenance, shorter outage times and lower maintenance costs.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| NN3021ZTBKRCC1P4 NSK | 105 | 160 | 41 |
| NN3020ZTBKRCC1P4 NSK | 100 | 150 | 37 |