- Hello Customer - Log in or Register!
TIMKEN bearings deformation is mainly because long-term load condition, TIMKEN bearing itself is a precision component, of course, able to cope with the requirements of the work under full load, but if it is long-term in the full load condition, it must not stand , so there is loose tight is the best.
TIMKEN bearings or components due to the force of the size or shape change phenomenon occurs is called deformation. Machinery and equipment of the production site due to poor working conditions, often overloaded operation, some of the spherical bearing deformation is very common. Their deformation will make the other parts to accelerated wear and tear, or rupture, may also lead to the system a series of bearing damage or damage to the entire device, resulting in equipment accident, so the deformation is a very serious hazard.
Long at full capacity, the overworked machinery and equipment, the duty rate already exceeds the provisions of indicators in the factory design, resulting in the deformation of TIMKEN bearings. For example, the duty rate of the steel rolling workshop finished cross-bridge crane is often up to 70%, and bridge main beam part of the flexible bending and deformation of the body and the four corners of wheel running, made a harsh friction screams.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 6924 NSK | 120 | 165 | 22 |
| 6824 NSK | 120 | 150 | 16 |