- Hello Customer - Log in or Register!
Bearing Type: Angular Contact Ball Bearings
Domestic new model: 7000 c
Domestic old models: 36100
Inside diameter (mm) : 10
Outside diameter (mm) : 26
Width (mm) : 8
Grease lubrication speed (r/min) : 47000
Cor (kN) : 2.45 Cr (kN) : 5.30
Lubrication speed (r/min) : 62000,
Weight (KG) : 0.021
Angular contact ball bearings can withstand radial load and axial load, also can withstand pure axial load, can work under high speed. Single row angular contact ball bearings can only carry axial load in one direction. When bear radial load, will cause the additional axial force, and can only limit shaft or shell axial displacement in one direction. If installed in pairs, make a pair of bearing outer ring is the same face, and the wide end face the wide end face, the narrow end face the narrow end face, this can avoid the additional axial force, but also make the shaft in two directions or shell limits within the axial clearance. Angular contact ball bearing mounted ball number more than deep groove ball bearing, thus in the ball bearing load capacity and rigidity is strong, smooth operation. Can take advantage of each other on inner and outer radial clearance displacement adjustment.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 605Z NTN | 5 | 14 | 5 |
| 695Z NTN | 5 | 13 | 4 |