- Hello Customer - Log in or Register!
1.Item: 6300-2rs 10X35X11 Bearing
2.Type: DeEP Groove Ball Bearing
3.Lubrication: Oil or Grease
4.Dimensions: 10mm x35mm x 11mm/Metric
5.ID (inner diameter)/Bore: 10mm
6.OD (outer diameter): 35mm Weight: 0.053kg
7.Width/Height/thickness: 11mm
8.Dynamic load rating Cr: 7.65kN
9.Static load rating Cor: 3.84KN
10.Limiting Speed:
Grease Lubrication:18000 RPM
Oil Lubrication: 24000 RPM
Generally speaking, a pair of deep groove ball bearing ring, a set of cage, a set of steel ball. Its simple structure, easy to use, is the production of the most common and most widely used type of bearings. This type of bearings is mainly used to bear radial load, but also can withstand a certain amount of either the direction of the axial load. When within a certain range, increase the bearing radial oil gap, this kind of bearing has the properties of Angle contact ball bearing, also can withstand a large axial load. Deep groove ball bearings on the shaft after, can make the shaft or the shell axial displacement limit in the range of the axial bearing. At the same time, when the shell hole and shaft bearings (or their inner circle) relative tilt, (no more than 8 ˊ ˊ - 16, according to clearance) can still work normally. Since there are tilted, you are bound to reduce the service life of the bearing.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 4T-3994/3920 NTN | 66.675 | 112.712 | 30.048 |
| 4T-3984/3925 NTN | 66.675 | 112.712 | 30.048 |