 |
AOH240/750G (240/750CAK30/W33, 240/750CAK, 240/750CCK Bearing Withdrawal Sleeve)
Min. Order:
1 Piece
Technical Parameters:
Product Designations:
AOH240/750G
Structure:
Withdrawal sleeves
Inside Diameter:
710 mm
Outside Diameter:
750 mm
Thickness:
408 mm
Brand:
JHB
Precision Rating:
P5 P6 PO
Bearing Material:
Q235.A3.C45 or OEM Required
Seals Type:
No
Description::withdrawal sleeve
Type:AOH240/750G withdrawal sleeve
Dimension:710x750x408 mm/Metic
ID(inner diameter)/Bore: 710 mm
OD(outer diameter)750 mm
Width/Height/thickness:408 mm
Removal Nut:HM31/800
Hydraulic nut:HMV160E
Lock nut:HM30/710
Locking device:MS30/710
Matched Bearing type: 240/750CAK30/W33, 240/750CAK, 240/750CCK bearing
Weight:178 kgs
The Ring material:Q235.A3.C45 or OEM Required
The delivery time:10-20 days
The package:standard export wooden case or carton boxes.
AOH240/750G Withdrawal sleeves are an alternative method of mounting bearings
with an interference fit. They permit removal at intervals for inspection or adjustment of machine parts.
By locating the bearing against the shaft shoulder or locating ring, the withdrawal sleeve is pressed into the bearing bore with a mounting or hydraulic nut until the radial clearance of the bearing is reduced to the required amount. For easier dismounting of the bearing, the withdrawal sleeve can be supplied with oil injection ducts.
Share this product to:
Let more people see your product
-
- Withdrawal sleeves AH208
- The dimension:35x40x25 mm, the bearing type: Spherical roller bearing 1208K, Weight:0.094kgs Withdrawal sleeves
-
- AH308 withdrawal sleeve
- Description::withdrawal sleeve Type:AH308 Dimension:35x40x32 mm/Metic ID(inner diameter)/Bore: 35 mm OD(outer diameter):40 mm Width/Height/thickness:32 mm Removal Nut:KM9 Hydraulic
-
- AH308 withdrawal sleeve (22208EK bearing)
- Description::withdrawal sleeve Type:AH308 Dimension:35x40x32 mm/Metic ID(inner diameter)/Bore: 35 mm OD(outer diameter):40 mm Width/Height/thickness:32 mm Removal Nut:KM9 Hydraulic
-
- AH2308 withdrawal sleeve (22308EK bearing)
- Description::withdrawal sleeve Type:AH2308 Dimension:35x40x43 mm/Metic ID(inner diameter)/Bore: 35 mm OD(outer diameter):40 mm Width/Height/thickness:43 mm Removal Nut:KM9 Hydraulic
-
- Swing conveyor base use turntable bearing 010.40.800
- The bearing 010.40.800 structure four point contact ball slewing bearing without teeth.
