6000 Series Bearings

6000Series- Extra Light Duty 

Simple Design, be convenient when use.

Advantage: Low Friction coefficient; High limit speed.

Single row radial deep groove ball bearings are rigid and non-separable in design. They incorporate deep running grooves on their inner and out rings creating a ball path that accepts 

axial and radial loading. The balls are separated by a cage that permits high speed operation. Their ability to accept misalignment

 is very limited however. In normal operation they  can't handle misalignment any greater than 10 angular minutes from their center position.

 Single Row Deep Groove Ball Bearings have the highest speed capacity of all rolling element bearings, and are by far the most popular 

bearing type in use today.

Bearings are supplied in an open, shielded (ZZ), or sealed (2RS) design.

Many sizes are also available with a snap ring installed on the bearing's outer ring.

• Open bearings are supplied with a light oil coating and are used in oil bath and oil misting applications.
• Sealed bearings are supplied with a contacting lip seal that excels in protecting the bearing from liquids and other foreign contaminants. The inherent design creates friction, drag, and in turn heat; factors that require consideration in high speed applications.

• Shielded bearings are provided with non-contacting metal shields that protect against larger particles entering the bearing, but do not protect against liquids. They add no friction during operation and therefore do not generate heat build-up.