22226CA/W33 Bearing 130x230x64mm

 DLSZ  22226CA/W33  Bearing

Our advantage:

Introduction:

With the same center as the bearing, 22226CA/W33 self-aliging roller bearing formed outer ring raceway can make self-alignment. Their rolling elements linearly come into contact with the raceways of inner ring and outer ring. The Spherical Roller Bearings can take greatradial load.

Features :   
1) Self-aliging roller bearings are principally provided with two rows of symmetrical spherical rollers and a common sphere raceway in out ring, the two inner ring raceways are included at an angle to the bearing axia

2) 22226CA/W33 bearings have good self-aligning ability and can operate when the shaft deflection under load or the shaft deflection under load or the shaft misaligning in mounting, and their permissible aligning angle is 1 to 2.5 degree

3) This type of bearings has heavy load carrying capacity and anti-impact ability, in addition to radial loads, they also can carry axial loads in two directions

4)In general, this type of bearings permits a low limiting speed.

Applications : 

22226CA/W33 Self-aligning roller bearing is designed in such a way that it is self-aligning.That means that bearing can adjust itself and angular alignment tolerance between outer rings.Under normal load and working condition and inner ring rotates,the unsymmetrical value listed in below table is allowed.Achieving completely specifide value is subject to design and seal type of configured bearing.