2216K Bearing

 Self-aligning Ball Bearing 

 Model: 2216K 

 Size: 80mm*140mm*33mm

 Meterial:Chrome steel

     Self-aligning Ball Bearing 2216K   is recommended when alignment of the shaft and housing is difficult and the shaft may flex. 

     The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used.

     Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.

     It has two rows of balls and a common concave sphered raceway in the outer ring.

    The bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing. It is particularly suitable for applications where considerable shaft deflections or misalignment are to be expected.

    Additionally, the self-aligning ball bearing has the lowest friction of all rolling bearings, which enables it to run cooler even at high speeds.

    Self-aligning Ball Bearing 2216K is available in several designs.

 Packing:

    Single packing, Tube Package,Carton,Pallets Or According To Your's Requirements